About SDT Products Applications Training User Group What's New Contact Us

English   Spanish

Home of
Ultrawave Technology Report
In This Issue: October 2004 
•   Ultrasound Tip - Hydraulic Testing
•   IMC-2004 Conference Brochure
•   Ultrasonic Learning Lab
•   Level 1 Training Classes Almost Full
•   Leak Testing Underground Tanks
•   International Ultrasound User Group Meeting
Ultrasound Tip - Hydraulic Testing
Ultrasound is a great technology for trouble shooting internal hydraulic leaks, blockages, and bypasses. Sidney Hand of Koch Cellulose in Brunswick, GA recently called to tell us how their Ultrawave SDT170 found an internal leak on a grappler hydraulic stop valve. The grappler is used to transport tons of timber through the mill and any malfunctions pose serious safety issues.

To test hydraulic cylinders on a grapple bucket they used the following procedure:
Position grapple bucket in working platform so that all four stop valves can be reached with detection equipment. With electric hydraulic pump pressurizing system, have operator close grapple.
Ensure SDT Ultrasonic Detector is set to the US sensor setting (internal leak setting). Position the SDT contact probe on the stop valve body and then instruct operator to pressurize system once again by continuously forcing the grapple into the closed position. Observe the amplitude bar scale and value on the SDT Detector. Note: An amplitude fluctuation of approximately twenty decibels indicates a properly seating, non-leaking stop valve.
With SDT headphones, listen for either a continual or fluctuating hissing sound. A continual hissing sound combined with a constant amplitude value means that the stop valve is leaking pressure.
 

 

Read the entire procedure and results
 

Hydraulic Cylinder on Timber Grapple
Ultrasonic Learning Lab
Visit the SDT Ultrasonic Learning Lab at IMC-2004 and learn about ultrasound inspection. Meet ultrasound experts from around the globe and find the answers to all your questions about ultrasound inspection.

Application based presentations will run for the duration of the conference. Individual work stations will expose you to all the applications for this wonder technology.

Learn how to perform:

• leak detection
• bearing monitoring
• condition based lubrication
• tightness testing
• underground
• storage tank testing
• electrical inspections
• steam trap inspections
• time waveform and spectrum analysis
• on-line leak monitoring


Find out how to:

• Implement an effective ultrasound program
• Get the most out of your ultrasound program
• Benchmark your ultrasound program
• Take your ultrasound program to the next level
 

 

Click for details on the Ultrasonic Learning Lab
 

Learning Labs at IMC-2004
Leak Testing Underground Tanks
Join us for this Feature Presentation on ultrasonic leak testing of underground storage tanks. Jan Verhofstadt of SDT International has spear-headed a program in Europe where over 10,000 underground tanks had to be certified tight.

At the heart of this initiative was the SDT Tank Test. Learn how this government driven project was managed from start to finish, leaking tanks were identified, and soil contamination avoided. The deadline for this program was short, and the consequences of a bad diagnosis would prove disastrous. We’ll see you at the United Nations of Ultrasound user group meeting for a thought provoking demonstration about an environmental disaster averted.
 

 

More details on the SDT Tank Test System
 

Register for SDT User Group
IMC-2004 Conference Brochure
Start scheduling your IMC-2004 activities now. Plan which speakers you want to see and still leave some time to dip your toes in the Gulf. Have you received the IMC-2004 Conference Brochure? You can download this 20 page document from our website.

 

Click here to get the IMC-2004 Brochure
 

Download the brochure (570 kbs)
Level 1 Training Classes Almost Full
Our Level 1 Classes are almost filled. If you plan to attend please hurry and get your spot reserved. There is still room in Mississauga, Ontario October 19-21 and Columbia, South Carolina November 8-10.

 

Click here to download course curriculm and registration
 

Download the Level 1 Brochure
International Ultrasound User Group Meeting
Ever wonder how Electrical Inspections are done in Brazil? Do you have a corporate initiative to reduce compressed air but trouble getting everyone to "buy-in"? The Ultrasound User Group Meeting will solve these and other problems that impede effective ultrasound programs.

This year's meeting is a "must attend" event for all serious ultrasound inspectors, regardless of whose ultrasound equipment you use.

* Meet ultrasound inspectors from around the globe
* Hear presentations from high quality speakers
* Learn tips and tricks from the cream of the crop
* Hands-on practice with latest technology
* Ask questions from Certification Trainer
* Provide your experience to this special group
* Leave enriched with ideas to enhance your program

Featured Presentations:

* Dan Durbin, Anheuser-Busch. Implementation Guidelines for an Effective Ultrasonic Inspection Program in a World Class Brewery

* Mr. Sussumu Valter Fukuda, LACTEC, Brazil Ultrasound and Infrared Inspections for Brazilian Power Generation

* Jan Verhofstadt, SDT International, Leak Testing Underground Storage Tanks

* Paul Klimuc, SDT North America. Condition Based Lubrication Best Practices

Plus! Here tips and tricks from your peers and ultrasound inspectors from every corner of the world.

 

Click here to learn more about the United Nations of Ultrasound
 


©2008 SDT North America - Privacy Statement